eki-5726f/fi specifcations communications ? standard ieee 802.3, 802.3u, 802.3x, 802.1p, 802.3az, 802.3ab ? lan 10/100/1000base-t(x), optional 100base-fx, 1000base-sx/lx/lhx/xd/zx/ezx ? transmission distance ethernet: up to 100 m (4-wire cat.5e, cat.6 rj-45 cable suggested for gigabit port) sfp: up to 110 km (depends on sfp) ? transmission speed ethernet: 10/100/1000 mbps auto-negotiation gigabit copper: 10/100/1000 mbps, auto-negotiation gigabit fiber: up to 1000 mbps in terface ? connectors 16 x rj45 2 x sfp ports 6-pin removable screw terminal (power & relay) ? led indicators p1, p2, p-fail, loop detection 10/100/1000t(x): link/activity, speed sfp: link/activity switch properties ? mac table size 8k ? packet buffer size 4.1m bit ? switching capacity 36 gbps ? jumbo frame 9216 bytes power ? power consumption max. 9.6w ? power input 12~48 v dc (8.4~52.8 v dc ), redundant dual inputs ? fault output 1 relay output mechanism ? dimensions (w x h x d) 74 x 120 x 84 mm ? enclosure ip30, metal shell with solid mounting kits ? mounting din-rail, wall protection ? reverse polarity present ? overload current present environment ? operating temperature eki-5726f: -10~60c (14~140f) eki-5726fi: -40~75c (-40~167f) ? storage temperature -40 ~ 85c (-40 ~ 185f) ? operating humidity 10 ~ 95% (non-condensing) ? storage humidity 10 ~ 95% (non-condensing) ? mtbf 1,962,789 hours certifcation ? safety iec/en 60950-1, ul508, class 1 division 2, atex, iecex ? emc ce, fcc ? emi en 55011/55022 class a, en 61000-6-4, fcc part 15 subpart b class a ? ems en 61000-4-2 (level 3) en 61000-4-3 (level 3) en 61000-4-4 (level 3) en 61000-4-5 (level 3) en 61000-4-6 (level 3) en 61000-4-8 (level 3) ? shock iec 60068-2-27 ? freefall iec 60068-2-32 ? vibration iec 60068-2-6 ? communicates with scada software via modbus/tcp ? communicates with nms (networking management system) via snmp ? port-based qos for deterministic data transmission ? -40~75c operating temperature range (eki-5726fi only) ? 12~48 v dc (8.4~52.8 v dc ) wide-range power input ? ems level 3 protection for extreme outdoor environments ? ieee 802.3az energy effcient ethernet (eee) ? jumbo frame support (up to 9,216 bytes) ? supports redundant 12~48v dc power input and p-fail relay ? loop detection introduction the eki-5726f/fi are the worlds frst convergence switches for process control and it networking management. this series uses modbus/tcp to communicate with the scada software and snmp to communicate with the nms (networking management system) at the same time, thereby allowing full read control over the devices either for control engineers or for it. the devices come with the port-based qos for deterministic data transmission allows the priority ports to prioritize the traffc coming over those ports and delay the less immediately necessary data over the remaining ports. eki-5726f/fi switches use the highest quality components, to enable the range to operate in temperatures of between -40 and 75c along with ems level 3 protection to repel electromagnetic interface for industrial resistance. all product specifcations are subject to change without notice rohs compliant 2011/65/eu 16-port+2 sfp gigabit ethernet proview switch date updated: 21-may-2015 industrial ethernet solutions features
mounting dimensions unit: mm [inch] eki-5726f/fi eki-5726f eki-5726f ordering information ? 16-port+2 sfp gigabit ethernet proview switch ? 16-port+2 sfp gigabit ethernet proview switch with wide operating temperature range www.advantech.com/products online download
|
